|
|
Gripdeck™ timber panels are a tailor-made range of
load-bearing and overlay anti slip panels designed for use on a variety of
applications including station platforms, bridges, ramps, point board covers,
track crossings and factory floors.
Manufactured from Finnish birch
throughout plywood which conforms to BS5268, the panels are fully resin
encapsulated and dressed with a near-diamond hard aggregate to give a typical
design life of 10 years.
A range of panels thicknesses, aggregate
grades, colours and edge finishes are available: tactile surfacing and 'colour
constant' high speed lines can also be incorporated for rail applications,
Resistant to oil and grease, the panels are suitable for both internal
and external use. |
 |
|
Product thickness:
•
Overlay Applications: ø 9mm, 12mm, 18mm.
• Load-bearing
Applications: ø 18mm, 24mm, 30mm 48mm.
Aggregate grades:
• Barefoot, Pedestrian, Heavy Industrial.
Colours:
•
Standard: black, yellow, blue.
• Specific BS and RAL colours available
on application.
Maximum sheet size:
• 2440mm x 1220mm -
overlay panels
• 3660mm x 1525mm - load-bearing panels
Product
benefits:
• A tried and tested method of providing both overlay and
structural decking at a reasonable cost,
• Panels are tailor-made to
specific requirements and are available in a choice of grades, colours, sizes
and edge and nosing details.
• Fixings holes are pre-drilled and
countersunk to help speed up installation.
• Resin sealing kits are
provided to seal holes after fixing and to help prolong panel life.
•
Panels are resistant to oil and grease and most chemicals |
 |
 |
|
 |
|
|
 Polydeck Ltd © 2005 |
Unit 14,
Burnett Industrial Estate
Cox's Green, Wrington
Bristol BS40 5QS
T: 01934 863678 F: 01934
863683 |
|
|
