|
|
GRIPFAST® On-street Blister Tactiles are designed to
provide a warning to visually impaired people who would otherwise, in the
absence of a kerb upstand <25mm high, find it difficult to differentiate
between where the footway ends and the carriageway begins.
The surface
is an essential safety feature at pedestrian crossing points and where the
footway is flush with the carriageway to enable wheelchair users to cross
unimpeded.
The product consists of rows of flat-topped
‘blisters’ 5mm high, spaced 66.8mm apart from the centre of one
blister to the centre of the next.
GRIPFAST® On-street Blister
Tactiles are made from GRP (glass reinforced polyester) sheet incorporating a
‘near diamond hard’ aggregate for a long life span. |
 |
|
Product thickness:
• 4mm
base plus 5mm blister.
Colours:
• Standard: buff or grey.
Tactiles must be a contrasting colour to the existing substrate.
•
Specific BS and RAL colours available on application.
Standard tile
size: • 800mm x 800mm
Product benefits
• Manufactured
from durable, GRP sheet.
• Incorporates a ‘near diamond
hard’ aggregate to give a hardwearing anti slip surface.
• Good
resistance to impact damage and will not shatter in normal use.
•
Satisfies the requirements of The Building Regulations 2000 Section 1.13h
• Conforms to DETR guidelines.
• Can be easily glued and/or
screwed down to virtually any surface, eliminating the need for time consuming
and costly excavation.
• Chamfered edge profile ensures Tactiles do
not pose a trip hazard. To achieve an exact coverage, the width of the Tactile
can be easily cut on site to fit specific areas. |
 |
 |
| To
achieve an exact coverage, the width of the Tactile can be easily cut on site
to fit specific areas. |
|
 |
|
|
 Polydeck Ltd © 2004 |
Unit 14,
Burnett Industrial Estate
Cox's Green, Wrington
Bristol BS40 5QS
T: 01934 863678 F: 01934
863683 |
|
|
